If you're looking for information on the various Harley 6 Pole Ignition Switch wiring diagrams, you've come to the right place. There are many sources online (including this one) where you can get a look at some very detailed diagrams of what is involved in completing this job. The general procedure consists of: The first step is to acquire the proper tools. The two most common tools that will be required to do this job are a pair pliers, a wire cutter, and a screw driver. You'll also need a tape measure and a pencil.
Once you have those tools, you'll need to start wiring up the bike's ignition switch. The process is pretty straight forward. The first thing you need to do is to take out the old spark plug. Then, remove the wire from its terminal and connect it to the new one. Most bikes come with a black wire, but yours may come with a red one as well.
Wrap the new wire around the existing wires to secure it into place. Once that is done, you need to run a bead of plumbers' flux over the connection points to make sure there are no leaks. Finally, connect the new ignition switch to the positive wire. Make any other changes to the ignition switch wiring diagram that you feel is necessary.
